EasyManua.ls Logo

Subaru Tribeca 2012 - Outside Temperature Indicator

Subaru Tribeca 2012
578 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Black plate (153,1)
Model "A3170BE-A" EDITED: 2011/ 7/ 12
To adjust the time shown by the clock,
press the + button or the button. The
indicated time will change in 1-minute
increm ents. If you keep the button
pressed, the rate at which the indicated
time changes will speed up.
When you keep either the + or button
pressed, time change will pause for 1
second at the end of each 30-minute
change. The clock will start going forward
or backward again quickly after this 1-
second pause.
CAUTION
To ensure safety, do not attempt to
set the time during driving, as an
accident could result.
Outside temperature indica-
tor
NOTE
If your vehicle is equipped with a
genuine SUBARU navigation system,
refer to the Owners Manual supple-
ment for the navigation system.
U.S.-spec. models
Except U.S.-spec. models
The outside temperature indicator shows
the outside temperature in a range from
22 to 1228F(30 to 508C) when the
ignition switch is in the ON position.
The indicator can give a false reading
under any of the following conditions.
. When there is too much sun.
. During idling; whi le running at low
speeds in a traffic jam; when the engine
is restarted immediately following a shut-
down.
. When the actual outside temperature
falls outside the specified indicator range.
Instruments and controls 3-23
CONTINUED
3
Information Provided by:

Table of Contents

Related product manuals