32
Changing the audio language
You can select a desired audio language from those available with the disc currently loaded in the player.
Method using screen and remote control:
Highlight the “AUDIO” switch on the screen with the remote control joystick, then
press the “ENTER” button. The display will switch to the audio language selection
screen.
Click the “ ” end of the remote control joystick to highlight the desired language on
the screen and then press the “ENTER” button. To revert to the original video
screen, highlight the “ ” switch with the joystick, and then press the “ENTER” but-
ton.
Method using remote control alone:
Press the remote control “AUDIO” button. Refer to the above for the subsequent op-
eration.
Playing Discs
To Next Page
Loading...
