Optional accessories
Battery
Description Part No. Remarks
Battery module BU-66S
BU-66L
Nominal capacity: 4500mAh
Nominal capacity: 9000mAh
Car battery cable PC-V66 Plugged into a car’s cigarette lighter jack to supply
electric power to splicer
Tools (Jacket remover, Fiber cleaver, and etc)
Description Part No. Remarks
FC-7M-F8
FC-7R-F
Applicable fiber: Single fiber and up to 8-fiber ribbon
Replacement blade for FC-7 and FC-6: FCP-20BL
Replacement blade for FC-7R: FCP-20BL(7R)
Fiber cleaver
FC-6M(-C) Applicable fiber: Single fiber and up to 12-fiber ribbon
Jacket remover JR-M03 Applicable fiber: Single fiber
Applicable coating diameter: 250μm, 900μm
Hot Jacket remover JR-6 Applicable fiber: single fiber and up to 12-fiber ribbon
Replacement blade for JR-6: JR-6BL
Dispenser HR-3 Dispenser for alcohol
FHS-025 For single fiber with 0.25mm coating
FHS-05 For single fiber with 0.5mm coating
FHS-09 For single fiber with 0.9mm coating
FHM-2 For 2-fiber ribbon
FHM-4 For 4-fiber ribbon
FHM-5 For 5-fiber ribbon
FHM-6 For 6-fiber ribbon
FHM-8 For 8-fiber ribbon
FHM-10 For 10-fiber ribbon
Fiber holders
FHM-12 For 12-fiber ribbon
[ FC-6M ]
The following optional accessories are provided for the TYPE-66. For further details,
please contact our sales personnel.
[ JR-6 ]
3
To Next Page
Loading...