Packing and storage instructions
• Store the TYPE-66 and its accessories in a designated place in the case referring to
the photo below.
• Store the splicer in the direction shown in the photo below.
• The splicer with a cooling tray cannot be stored in the case. Remove the cooling tray
from the splicer and store it in the pocket.
37
The TYPE-66 fusion splicer is a precision instrument. Its rugged shipping case is
custom designed to protect it from impact, dust, dirt, and moisture. Always store and
transport the machine in its case. Observe the following instructions.
• Clean the TYPE-66 and all accessories before storing them.
• Be sure to remove the battery from the TYPE-66 and store it in a given place.
Keeping the battery in the TYPE-66 may cause the battery
terminal to be damaged or deteriorated, resulting in fire.
Operation manual
Quick reference guide
Cooling tray
• Reposition the monitor before storing.
• Discard the liquid solvent properly, or lock the dispenser completely and put it in a
plastic bag before packing the dispenser in the case.
Warning
Spare electrodes
Battery module
Carrying case
Fiber cleaver (Optional*)
Power cord
Jacket remover
(Optional*)
Battery charge cord
*Sold separately
To Next Page
Loading...