129
APPENDIX
D
Specifications
This appendix provides the Netra 240 server specifications. This appendix is divided
into the following sections:
■ “Physical Specifications” on page 129
■ “Environmental Requirements” on page 130
■ “Acoustic Noise Emissions” on page 131
■ “Electrical Specifications” on page 131
■ “NEBS Level 3 Compliance for the DC-Powered Server” on page 132
Physical Specifications
TABLE D-1 Physical Specifications of the Netra 240 Server
Netra 240 Server Dimensions Measurements
Height 2 rack units (RU) 3.44 inches (87.4 mm)
Width without bezel 16.73 inches (425 mm)
Width with bezel 17.4 inches (442 mm)
Depth from front bezel to system board connectors 19.0 inches (483 mm)
Depth to rear of power supply unit handle 20.06 inches (509.5 mm)
Weight (approximate) with full configuration
(not including PCI cards and mounting brackets)
36 lbs (16.33 kg)
Weight (approximate) with full configuration
(including PCI cards and mounting brackets)
41 lbs (18.6 kg)
To Next Page
Loading...
