6 Netra 240 Server Service Manual • June 2004
FIGURE 1-4 Processor Fans and Heat Sink Assemblies on a Replacement System Board
Note – The Netra 240 server comes installed with heat sink assemblies, and no
processor fans, on the system board(s). However, processor fans and heat sink
assemblies are present on a field-replaceable system board assembly. See
Appendix A for system board FRU part numbers and “Installing a System Board” on
page 95 for instructions on removing the processor fans during system board
installation.
Optional Components
TABLE 1-2 lists the order numbers of the optional server components, and TABLE 1-3
lists the order numbers of the optional PCI cards.
Note – The list of optional components might be updated at any time. Refer to the
Sun Store
SM
web site (http://store.sun.com) for the most current list of Netra
240 server supported components.
Processor fans and
heatsink assemblies
System board assembly
To Next Page
Loading...
