Sun Microsystems Netra 240 - FIGURE 5-6 Removing and Installing the Upper Half-Length PCI Cards

Chapter 5 Removing and Replacing Miscellaneous Internal Components 79
8. Determine which of the PCI cards you are removing from the server.
■ If you are removing one of the two half-length PCI cards installed in the upper
positions (PCI1 or PCI2), unseat the PCI card from the connector and lift it out of
the server (
FIGURE 5-6).
FIGURE 5-6 Removing and Installing the Upper Half-Length PCI Cards
■ If you are removing the full-size PCI card at the lowest position (PCI0), follow
these instructions:
Upper half-length cards