78 Sun Fire V890 Server Rackmounting Guide • May 2004
Attach the Tray Assembly to the Cabinet
Using the rail holes you marked in “Determine the Vertical Position of the Server in
the Cabinet” on page 77, attach the tray assembly to the cabinet by completing the
following steps:
1. Attach the front brackets on the slides of the tray assembly to the front rails of the
cabinet.
a. With the help of an assistant, position the tray assembly on the inside of the
cabinet with the front brackets at the front of the cabinet.
To fit the tray assembly between the rails, you will need to tilt it by lowering one
side of the assembly.
To Next Page
Loading...
