User Manual 8 Web Interface
45
Click "System" -> "Transfer configuration" to enter the corresponding interface.
iSolarCloud
The default iSolarCloud station is "iSolarCloud of China". Users in
mainland China select "iSolarCloud of China", users in Europe select
"iSolarC
loud of Europe", and users in other regions select the
"iSolarCloud of International".
Step 1 Click "System" -> "Transfer configuration" to enter the corresponding
interface.
Step 2 Click the button to modify the forwarding configuration information of
iSolarCloud.
IEC104
Configure the IEC104 forwarding service for the Logger1000 on this interface.
Click "System" -> "Transfer configuration" -> "IEC104" to enter the corresponding
interface.
The local port is 2404.
White list setting
When the option "Enable the white list or not" is not selected, and the default IP
address is "0.0.0.0", any background devices with valid IP address can access the
Logger1000.
When the option "Enable the white list or not" is selected, and specified IP address is
entered, only the device with the specified IP address can access the Logger1000.
Edit IEC104 forwarding point table
Step 1 Click "Export of configuration tools" to export the IEC104 forwarding point
table.
Step 2 Open the sheet "Introduce" of the IEC104 forwarding point table, where data
of five types (telemetry, telesignalling, remote pulse, remote control, and
remote regulating) are included.
Tab. 8-3 Introduce tab parameters
To Next Page
Loading...
