8
2
Installation
Respect all local standards and requirements during mechanical installation.
Any damage or malfunction with the charger caused by negligence or improper
use will not be eligible for service and replacement under the warranty.
2.1 Installation Requirements
Location Requirements
Select an optimal mounting location for safe operation, long service life and expected
performance.
• The charger with protection rating IP65 can be installed both indoors and outdoors.
• The charger should be installed at a place where the LED signals can be easily seen,
and is convenient for electrical connection, operation, and maintenance.
Environment Requirements
• There must be no flammable hazards or ignition risks.
• The mounting location must be inaccessible to children.
• The ambient temperature and relative humidity must meet the following requirements.
• Avoid exposure to direct sunlight, rainwater and snow.
• The charger should be well-ventilated for good air circulation.
• The mounting location must be away from living area. The charger will emit noises dur-
ing operation that might be perceived as disturbing.
To Next Page
Loading...
Need help?
General