1
1 Product Overview
1.1 Introduction
The AC011E-01 charger (hereinafter referred as "charger" or "AC-Charger") is used for AC
charging of electric vehicles (BEV/PHEV) and can be either wall-mounted or pole-mounted,
with the following advantages.
Ease of Use
EV drivers can start and stop charging via RFID card, iSolarCloud or iEnergyCharge. When
the vehicle is fully charged, the charging will stop. The charger also supports plug&play,
which means the charging starts automatically as soon as the charging connector is plugged
into the vehicle.
Smart and Easy Management
In addition to the LED lights on the charger that indicate charging status, EV drivers can vis-
ualize and control the charging session remotely via iSolarCloud or iEnergyCharge.
Sustainability
With an IP65 rating, the charger is water and dust proof, allowing for outdoor use and
maintenance.
1.2 Appearance and Dimensions
Model and Nameplate
The charger comes with two versions to meet different energy-saving needs:
• AC011E-01 (hereinafter referred as "the advanced version")
• AC011E-01 L1 (hereinafter referred as "the standard version")
To Next Page
Loading...
Need help?
General