4
Dimensions
figure 1-2 Dimensions (in mm)
1.3 LED Signals
table 1-2 LED Signals
LED Signal Description
The blue LED blinks slowly (on for 1 s and off for 4 s)
Standby mode
The blue LED blinks (on for 1 s and off for 1 s)
Vehicle charging
The blue LED is glowing
Charging ended
The blue LED blinks quickly (on for 0.5 s and off for 0.5 s)
Vehicle plugged in
The blue LED blinks quickly for five times (on for 0.2 s and
off for 0.2 s)
RFID card used
The blue LED blinks slowly (on for 2 s and off for 2 s) No RS485 communication in
standby mode under EMS
The blue LED is on for 1 s and the red LED is on for 1 s
Power-on self-test
The blue indicator blinks quickly
Firmware upgrading
1 Product Overview User Manual