31
Step 5 Select a charging mode based on your needs, and tap Continue. Then, set the server ad-
dress, and tap Continue.
Mode Description Note
OCPP Charge using the stand-alone EV
charger.
The default mode for AC011E-01
L1.
By default, AC011E-01 L1 does
not support EMS charging. Con-
tact customer service for assis-
tance if you require EMS charging.
Plug&Play Plug and charge.
-
EMS Available when used with the SUN-
GROW solar-energy storage-EV
charging system.
The default mode for AC011E-01.
If the charging mode is set to “EMS”, you need to enter the password, which is the
4-digit PIN code on the RFID card.
Default server address: wss://europe.suncharger.cn:20038.
If you want to add a non-SUNGROW charger, enter the server address provided
by the operator.
User Manual 5 iEnergyCharge App
To Next Page
Loading...
Need help?
General