3
Follow the steps in this manual strictly to power the device after
maintenance and troubleshooting.
1.3 During Operation
1.3.1 Manuals
Very important information about the PCS operation is contained in this manual.
All the descriptions in this manual, especially those safety-related items, must
be complied with.
Operate the PCS by strictly following the description in this manual. Device
damage, personal injury or property loss may follow if otherwise.
These manual and other related documents should be available for relevant
persons at all times.
1.3.2 Personnel
Only professional electrician or personnel with professional training can
operate the PCS;
Operator should be familiar with the construction and working principle of the
whole energy storage system;
Operator should be familiar with the PCS Operation Manual and Installation
Manual;
Operator should be familiar with the country/local specific standards.
1.3.3 Markings on the PCS
PCS enclosure and interior contains important warning and safety
information. Do not tear or damage it.
Nameplates located in the side of the cabinet contain very important
parameter information. Do not tear or damage them.
All safety instructions, warning labels and nameplate on the PCS body
must be clearly visible;
Replace the markings once they damaged or unclear.
To Next Page
