Sungrow SC50HV - Dismantling the PCS; Disposing the PCS

2 User Manual 8 iSolarCloud
APP
2.1 Brief Introduction
The iSolarCloud APP can establish communication connection to the PCS via
the Bluetooth, thereby achieving near-end maintenance on the PCS. Users can
use the APP to view basic information, alarms, and events, set parameters, or
download logs, etc.
*In case the communication module Eye or WiFi is available, the iSolarcloud
APP can also establish communication connection to the PCS via the mobile
data or WiFi, thereby achieving remote maintenance on the PCS.
 This manual describes only how to achieve near-end maintenance
via the Bluetooth connection. For remote maintenance through the
Eye or WiFi, refer to the related manuals in the delivery scope.
 Screenshots in this manual are based on the Android system
V2.1.4, and the actual interfaces may differ.
2.2 Download and Install
61
Step 6 Loose screws to remove AC cables.
Step 7 Disconnect DC cables from the PCS.
9.2 Dismantling the PCS
Refer to Chapter 5 and Chapter 6 to dismantle the PCS in reverse steps.
If the PCS will be reinstalled in the future, please refer to 4.4 Storage of
PCS for a proper conservation.
9.3 Disposing the PCS
Users should take the responsibility for the disposal of the PCS.