EasyManua.ls Logo

Sungrow SC50HV - Moving PCS to Installation Site; Installation Tools

Sungrow SC50HV
84 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
22
Do not install the PCS in a confined space.
The PCS will not work normally if otherwise.
Install the PCS where children cannot reach.
Do not install the PCS near residential areas.
Noise can be produced during PCS operation
which may affect the daily life.
5.2 Moving PCS to Installation Site
To install the PCS, remove the PCS from the packaging and move it to the
installation site. Follow the instructions below as you move the PCS:
Always be aware of the weight of the PCS.
Lift the PCS by grasping the handles on both sides of the PCS.
A minimum of two people or proper moving devices should be used to move
the PCS.
Do not release the equipment unless it has been secured firmly.
5.3 Installation Tools
Gather the following tools before installation:
Type
Tool
Gener
al
tools
Packaging
tape
Marker
Measuring tape
Level
Utility knife
Multimeter
Measurement
880.0
Protective
clothing
Wrist strap

Table of Contents

Other manuals for Sungrow SC50HV

Related product manuals