Sungrow SC50HV - Communication Parameters

53
Tab. 8-4 Explanation of system parameters
Parameter
Description
Date Setting
Time deviation between the time on the device and the
local time of the installation site may cause data logging
failure. Please adjust device time according to the local
time.
Time Setting
Remote / Local
Remote/Local control
BMS mandatory
command
Reserved
PCS operating
mode
Inversion operating mode: grid-connection mode, off-grid
mode, and hybrid mode.
Restore default
All history information will be unrecoverable cleared and all
parameters will return to the default value except the
protective parameters and time once the “Reset to Factory
Defaults” operation is performed.
S/N
Serial number of this device.
Firmware version
Including LCD and DSP software version.
8.8.3 Communication parameters
Tap " " to enter the communication parameter screen.