Sunmi Blink - Time Interval that Keyboard Outputs Character 键盘输出字符时间间隔

68 pages

Save Page as PDF

To Next Page

To Previous Page





(0x14)

Spain 西班牙

(0x16)

Sweden 瑞典

(0x17)

Turkey_F 土耳其_F

(0x19)

Turkey_Q 土耳其_Q

(0x1A)

England 英国

(0x1B)

Japan 日本

(0x1C)

Time interval that keyboard outputs character 键盘输出字符时间间隔

Time interval that keyboard outputs character, range: 0-1000ms,unit: 5ms,default: 5ms

键盘输出字符间隔,范围 0-1000ms,单位:5ms,默认:5ms

Main Page

Table of Contents1
Set Default Parameter 设置默认参数4
- Factory Default Configuration 出厂默认配置4
Interval Time 识读间隔时间4
Beeper Volume 蜂鸣器音量4
Beep after Good Decode 解码成功提示声5
Terminator 结束符设置5
Led after Good Decode 解码成功提示灯6
Mute 静音7
Boot Prompt 开机提示音7
Setup Code Prompt 设置码参数提示音7
Prefix/Suffix Values 前缀/后缀值8
Scan Data Transmission Format 数据传输格式8
Communication Mode 通信方式10
Sensitivity Level 灵敏度等级10
Stability of Induction Time 稳定感应时间11
Output Interval of the same Code 相同读码延时11
Output Product Information 输出产品信息12
Output Character Set Type 输出字符集类型12
Input Character Set Type 输入字符集类型13
Usb Type Usb 类型14
Keyboard 键盘14
- Country/Language Keyboard 国家/语言键盘布局选择14
- Time Interval that Keyboard Outputs Character 键盘输出字符时间间隔16
- Quick Settings of Keyboard Output Time Interval 键盘输出时间间隔快速设置17
- Letter Case Conversion 键盘输出强制字母大小写转换17
- Keyboard Type 键盘类型18
Barcode Global Switch 条码全局开关19
- 1D Global Switch 一维码开关19
- 2D Global Switch 二维码开关19
- All Barcode Switch 全部条码开关20
Upc/Ean21
- Enable/Disable UPC-A 使能/禁止 UPC-A21
- Enable/Disable UPC-E 使能/禁止 UPC-E21
- Enable/Disable EAN-8 使能/禁止 EAN-821
- Enable/Disable EAN-13 使能/禁止 EAN-1322
- Enable/Disable Bookland EAN(ISBN) 使能/禁止 Bookland EAN(ISBN)22
- Decode UPC/EAN Supplementals UPC/EAN 附加码22
- Transmit UPC-A Check Digit 传输 UPC-A 校验位23
- Transmit UPC-E Check Digit 传输 UPC-E 校验位23
- UPC-A Preamble UPC-A 前导码24
- UPC-E Preamble UPC-E 前导码25
- Convert UPC-E to UPC-A 转换 UPC-E 为 UPC-A25
- EAN-8 Zero Extend EAN-8 零扩展26
- Bookland ISBN Format Bookland ISBN 格式26
- UPC/EAN Security Level UPC/EAN 安全级别27
Code 12828
- Enable/Disable Code 128 使能/禁止 Code 12828
- Enable/Disable GS1-128 (Formerly UCC/EAN-128)使能/禁止 GS1-128（原 UCC/EAN-12828
- Enable/Disable ISBT 128 使能/禁止 ISBT 12829
- Lengths for Code 128 Code 128 的长度29
Code 3929
- Enable/Disable Code 39 使能/禁止 Code 3929
- Set Lengths for Code 39 Code 39 长度设置30
- Code 39 Check Digit Verification Code 39 校验位验证31
- Transmit Code 39 Check Digit 传输 Code 39 校验位31
- Enable/Disable Code 39 Full ASCII 使能/禁止 Code 39 Full ASCII32
- Code 39 Transport Start Character and Terminator Code 39 传送起始符与终止符32
- Convert Code 39 to Code 32 (Italian Pharma Code) 转换 Code 39 为 Code 32（意大利医药码33
- Code 32 Prefix Code 32 前缀33
Code 9334
- Enable/Disable Code 93 使能/禁止 Code 9334
- Set Lengths for Code 93 设置 Code 93 长度34
Code 1135
- Enable/Disable Code 1135
- Set Lengths for Code 11 Code 11 长度设置36
- Code 11 Check Digit Verification Code 11 校验码验证37
- Transmit Code 11 Check Digits 传输 Code 11 校验位37
Interleaved 2 of 5/Itf/交叉 25 码38
- Enable/Disable Interleaved 2 of 5 使能/禁止 Interleaved 2 of 538
- Set Lengths for Interleaved 2 of 5 Interleaved 2 of 5 长度设置38
- I 2 of 5 Check Digit Verification I 2 of 5 校验码验证39
- Transmit I 2 of 5 Check Digit 传输 I 2 of 5 校验位40
- Convert I 2 of 5 to EAN-13 转换 I 2 of 5 为 EAN-1340
Discrete 2 of 5/Industrial 2 of 5/Ind25/工业 25 码41
- Enable/Disable Discrete 2 of 5 使能/禁止 Discrete 2 of 541
- Set Lengths for Discrete 2 of 5 Discrete 2 of 5 长度设置41
Matrix 25(矩阵 25)43
- Enable/Disable Matrix 25 使能/禁止 Matrix 2543
- Matrix 25 Check Digit Verification Matrix 25 校验位验证43
- Transmit Matrix 25 Check Character 传输 Matrix 25 校验字符43
- Set Lengths for Matrix 25 Matrix 25 长度设置44
Standard 25/Iata 25(标准 25)45
- Enable/Disable Standard 25 使能/禁止 Standard 2545
- Standard 25 Check Digit Verification Standard 25 校验位验证45
- Transmit Check Character 传输校验字符45
- Set Lengths for Standard 25 Standard 25 长度设置46
Codabar47
- Enable/Disable Codabar 使能/禁止 Codabar47
- Set Lengths for Codabar Codabar 长度设置47
- NOTIS Editing NOTIS 编辑48
- Start Character and Terminator 起始符与终止符格式49
- Letter Case Setting of Start Character and Teminator 起始符和终止符字母大小写的设置49
Msi/Msi Plessey50
- Enable/Disable MSI 使能/禁止 MSI50
- Set Lengths for MSI MSI 长度设置50
- MSI Check Digits MSI 校验位51
- Transmit MSI Check Digit 传输 MSI 校验码52
- MSI Check Digit Algorithm MSI 校验码算法52
GS1 Databar/Rss53
- Enable/Disable GS1 Databar-14 使能/禁止 GS1 Databar-1453
- Enable/Disable GS1 Databar Limited 使能/禁止 GS1 Databar Limited53
- Enable/Disable GS1 Databar Expanded 使能/禁止 GS1 Databar Expanded53
Pdf41754
- Enable/Disable PDF417 使能/禁止 PDF41754
- Read Multi-Code 识读多码54
- Read Normal Phase/ Phase Reversal 正/反相识读55
- Enable/Disable QR 使能/禁止 QR55
- Read Multi-Code 识读多码56
- ECI Control ECI 控制56
Data Matrix(DM)56
- Enable/Disable Data Matrix(DM) 使能/禁止 Data Matrix(DM)56
- Read Multi-Code 识读多码57
- Read Normal Phase/ Phase Reversal 正/反相识读57
- ECI Control ECI 控制58
Maxi Code58
- Enable/Disable Maxi Code 使能/禁止 Maxi Code58
Aztec Code59
- Enable/Disable Aztec Code 使能/禁止 Aztec Code59
Han Xin Code59
- Enable/Disable Han Xin Code 使能/禁止 Han Xin Code59
- Read Multi-Code 识读多码59
- Read Normal Phase/ Phase Reversal 正/反相识读60
Issn60
Plessey61
Appendix 附录62
Numeric Bar Codes 数字设置码62
Cancel 取消条形码63

Sunmi Blink - Time Interval that Keyboard Outputs Character 键盘输出字符时间间隔

Table of Contents

Related product manuals