Sunmi Blink - I 2 of 5 Check Digit Verification I 2 of 5 校验码验证



39
I 2 of 5 - One Discrete Length I 2 of 5 -一个单独长度
Two Discrete Lengths - Select this option to decode only those codes containing two selected lengths.
For example, select I 2 of 5 Two Discrete Lengths, then scan 0, 6, 1, 4, to decode only I 2 of 5 symbols
containing 6 or 14 characters. Numeric Bar Codes is in appendix. To change the selection or cancel an
incorrect entry, scan Cancel in appendix.
两个单独的长度-选择此长度可用来解码那些包含两个既定长度的代码。例如，选择I 2 of 5 Two Discrete
Lengths，然后扫描0，6，1，4，只可用来解码包含6个或者14个字符的I 2 of 5码制。
数字设置码 见附录，改
变选择或者取消一个不正确的输入设置，扫描附录中的
取消条形码 。
I 2 of 5 - Two Discrete Lengths I 2 of 5 -两个单独的长度
Length Within Range - Select this option to decode only codes within a specified range. For example,
to decode I 2 of 5 symbols containing between 4 and 12 characters, first scan I 2 of 5 Length Within Range,
then scan 0, 4, 1 and 2 (single digit numbers must always be preceded by a leading zero). Numeric Bar
Codes is in appendix. To change the selection or cancel an incorrect entry, scan Cancel in appendix.
特定范围内的长度-选择此项解码指定范围的代码。例如，解码包含4个到12个字符的I 2 of 5，首先扫描I 2
of 5 Length Within Range，然后扫描0，4，1，和2（不足3位用0补齐）。
数字设置码 见附录，改变选择或者
取消一个不正确的输入设置，扫描附录中的
取消条形码 。
I 2 of 5 - Length Within Range I 2 of 5 -特定范围内的长度
Any Length - Scan this option to decode I 2 of 5 symbols containing any number of characters.
NOTE Selecting this option may lead to misdecodes for I 2 of 5 codes.
任意长度-扫描此项可解码包含任意字符的I 2 of 5码制
注：选择此项可能导致I 2 of 5错误解码。
I 2 of 5 - Any Length I 2 of 5 –任意长度
I 2 of 5 Check Digit Verification I 2 of 5 校验码验证
When enabled, this parameter checks the integrity of an I 2 of 5 symbol to ensure it complies with a
specified algorithm, either USS (Uniform Symbology Specification), or OPCC (Optical Product Code Council).
当使能时，此参数检查 I 2 of 5 码制的完整性来确保其符合指定的算法，包括 USS（统一符号规范）或者
OPCC（光学产品代码委员会）