Sunmi Blink - Set Lengths for Standard 25 Standard 25 长度设置



46
*禁止 Standard 25 传输校验字符 Disable Standard 25 Transmit Check Character
(0x00)
使能 Standard 25 传输校验字符 Enable Standard 25 Transmit Check Character
(0x01)
Set Lengths for Standard 25 Standard 25 长度设置
The length of a code refers to the number of characters (i.e., human readable characters), including
check digit(s) the code contains. Lengths for Standard 25 may be set for any length, one or two discrete
lengths, or lengths within a specific range. To set lengths via serial commands, see Setting Code
Lengths Via Serial Commands.
一个代码的长度指的是此代码所包含的字符数（如：人类可读的字符），包括校验码。Standard 25可设置
成任意的长度，一个或两个单独的长度，或者在特定范围内的长度。通过串行命令设置长度，见附录中的
通过
串行命令设置代码长度
。
One Discrete Length - Select this option to decode only those codes containing a selected length. For
example, select Standard 25 One Discrete Length, then scan 1, 4, to decode only Standard 25 symbols
containing 14 characters. Numeric Bar Codes is in appendix. To change the selection or cancel an incorrect
entry, scan Cancel in appendix.
一个单独长度-选择此长度可用来解码那些包含既定长度的代码。例如，选择 Standard 25 One Discrete
Length，然后扫描 1,4，来解码包含 14 个字符的 Standard 25 码制。
数字设置码 见附录，改变选择或者取消一
个不正确的输入设置，扫描附录中的
取消条形码 。
Standard 25 - One Discrete Length 一个单独长度
Two Discrete Lengths - Select this option to decode only those codes containing two selected lengths.
For example, select Standard 25 Two Discrete Lengths, then scan 0, 2, 1, 4, to decode only Standard 25
symbols containing 2 or 14 characters. Numeric Bar Codes is in appendix. To change the selection or cancel
an incorrect entry, scan Cancel in appendix.
两个单独的长度-选择此长度可用来解码那些包含两个既定长度的代码。例如，选择 Standard 25 Two
Discrete Lengths，然后扫描 0，2，1，4，只可用来解码包含 2 个或者 14 个字符的 Standard 25 码制。
数字
设置码
见附录，改变选择或者取消一个不正确的输入设置，扫描附录中的 取消条形码 。
Standard 25 - Two Discrete Lengths 两个单独的长度
Length Within Range - Select this option to decode codes within a specified range. For example, to
decode Standard 25 symbols containing between 4 and 12 characters, first scan Standard 25 Length
Within Range, then scan 0, 4, 1 and 2 (single digit numbers must be preceded by a leading zero). Numeric
Bar Codes is in appendix. To change the selection or cancel an incorrect entry, scan Cancel in appendix.
特定范围内的长度-选择此项解码指定范围的代码。例如，解码包含 4 个到 12 个字符的 Standard 25，首 先
扫描 Standard 25 Length Within Range，然后扫描 0，4，1，和 2（不足 3 位用 0 补齐）。
数字设置码 见附
录，改变选择或者取消一个不正确的输入设置，扫描附录中的
取消条形码 。