Sunmi Blink - Beep after Good Decode 解码成功提示声; Terminator 结束符设置



5
Medium 中
(0x01)
*High 高
(0x00)
Beep After Good Decode 解码成功提示声
Scan this symbol to set the scan engine to beep after a good decode.
扫描以下条码设置当识读引擎解码成功时发出成功的提示声。
*Beep After Good Decode解码成功提示声
(0x01)
Scan this symbol to set the scan engine not to beep after a good decode. The beeper still operates
during parameter menu scanning and indicates error conditions.
扫描以下的条形码设置识读引擎解码成功后不发出提示声。蜂鸣器仍在参数菜单扫描期间工作，并指示
错误条件。
Do Not Beep After Good Decode解码成功无提示声
(0x00)
Terminator 结束符设置
Add character format: Decode Data+Terminator.
结束字符是在解码数据后面添加字符格式: 解码数据+结束字符。
*禁止 Disable
(0x00)