EasyManua.ls Logo

Sunmi Blink - Standard 25;Iata 25(标准 25); Enable;Disable Standard 25 使能;禁止 Standard 25; Standard 25 Check Digit Verification Standard 25 校验位验证; Transmit Check Character 传输校验字符

Sunmi Blink
68 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...

45
NOTE Selecting this option may lead to misdecodes for Matrix 25 codes.
任意长度-扫描此项可解码包含任意字符的Matrix 25码制
注:选择此项可能导致 Matrix 25 误解码。
Matrix 25 - Any Length 任意长度
Standard 25/IATA 25(标准 25)
Enable/Disable Standard 25 使能/禁止 Standard 25
To enable or disable Standard 25, scan the appropriate bar code below.
扫描以下相对应的条码来设置使能或禁止 Standard 25
*Disable Standard 25 禁止
(0x00)
Enable Standard 25 使能
(0x01)
Standard 25 Check Digit Verification Standard 25 校验位验
*禁止 Standard 25 校验确认 Disable
Standard 25 Check Digit Verification
(0x00)
使能 Standard 25 校验确认 Enable Standard 25 Check Digit Verification
(0x01)
Transmit Check Character 传输校验字符

Table of Contents

Related product manuals