Sunmi Blink - Code 128; Enable;Disable Code 128 使能;禁止 Code 128; Enable;Disable GS1-128 (Formerly UCC;EAN-128)使能;禁止 GS1-128（原 UCC;EAN-128



28
UPC/EAN Security Level 2 UPC/EAN安全级别2
(0x02)
UPC/EAN Security Level 3
UPC/EAN 安全级别 3
If misdecodes still occur after selecting Security Level 2, select this security level. Be advised, selecting
this option is an extreme measure against mis-decoding severely out of spec bar codes. Selection of this level
of security significantly impairs the decoding ability of the scan engine. If this level of security is necessary, try
to improve the quality of the bar codes.
如果选择安全水平2之后仍出现错误解码，请选择此安全级别。请注意，选择此选项是应对条形码严重错误
解码的非常手段，选择此安全水平大大的削减识读引擎的解码能力。如果这个级别的安全性是必要的，最好尽
量提升条码的质量。
UPC/EAN Security Level 3 UPC/EAN安全级别3
(0x03)
Code 128
包括AIM128控制,但是输出类型不一样。
Including AIM128 ,but the output type is different.
Enable/Disable Code 128 使能/禁止 Code 128
To enable or disable Code 128, scan the appropriate bar code below.
扫描以下相对应的条码来设置使能或禁止Code 128。
*Enable Code 128 使能Code 128
(0x01)
Disable Code 128 禁止Code 128
(0x00)
Enable/Disable GS1-128 (formerly UCC/EAN-128)使能/禁止 GS1-128（原 UCC/EAN-128）
To enable or disable GS1-128, scan the appropriate bar code below.
扫描以下相应的条码来使能或者禁止GS1-128。