Sunmi Blink - UPC-E Preamble UPC-E 前导码; Convert UPC-E to UPC-A 转换 UPC-E 为 UPC-A



25
系统字符&国家码
UPC-E Preamble UPC-E 前导码
Preamble characters (Country Code and System Character) can be transmitted as part of a UPC-E
symbol. Select one of the following options for transmitting UPC-E preamble to the host device: transmit
system character only, transmit system character and country code (“0” for USA), or transmit no preamble.
前导码字符(？代码和系统字符)可作为部分UPC-E码制被传输。选择以下其中一个选项设置并传输
UPC-E前导码给主机：仅传输系统字符，传输系统的字符和国家代码（“0”为美国），或者不发送前导。
No Preamble 无前导码
(<DATA>)
(0x00)
*System Character系统字符
(<SYSTEM CHARACTER> <DATA>)
(0x01)
System Character & Country Code系统字符&国家码
(< COUNTRY CODE> <SYSTEM CHARACTER><DATA>)
(0x02)
Convert UPC-E to UPC-A 转换 UPC-E 为 UPC-A
Enable this parameter to convert UPC-E (zero suppressed) decoded data to UPC-A format before
transmission. After conversion, data follows UPC-A format and is affected by UPC-A programming selections
(e.g., Preamble, Check Digit).
Scan DO NOT CONVERT UPC-E TO UPC-A to transmit UPC-E (zero suppressed) decoded data.
传输前允许此参数由UPC-E (零抑制)解码数据转换为UPC-A格式。转换后，数据遵循UPC-A格式并受
UPC-A编程选择影响（例如：前导码，校验码）。
扫描不转换UPC-E 为 UPC-A 传输UPC-E(零抑制)解码数据。
Convert UPC-E to UPC-A
转换Convert UPC-E为UPC-A
(0x01)