Sunmi Blink - Set Lengths for Matrix 25 Matrix 25 长度设置



44
Disable Matrix 25 Transmit Check Character *禁止 Matrix 25 传输校验字符
(0x00)
Set Lengths for Matrix 25 Matrix 25 长度设置
The length of a code refers to the number of characters (i.e., human readable characters), including
check digit(s) the code contains. Lengths for Matrix 25 may be set for any length, one or two discrete
lengths, or lengths within a specific range. To set lengths via serial commands, see Setting Code
Lengths Via Serial Commands.
一个代码的长度指的是此代码所包含的字符数（如：人类可读的字符），包括校验码。Matrix 25可设置成
任意的长度，一个或两个单独的长度，或者在特定范围内的长度。通过串行命令设置长度，见附录中的
通过串
行命令设置代码长度
。
One Discrete Length - Select this option to decode only those codes containing a selected length. For
example, select Matrix 25 One Discrete Length, then scan 1, 4, to decode only Matrix 25 symbols
containing 14 characters. Numeric Bar Codes is in appendix. To change the selection or cancel an incorrect
entry, scan Cancel in appendix.
一个单独长度-选择此长度可用来解码那些包含既定长度的代码。例如，选择 Matrix 25 One Discrete
Length，然后扫描 1,4，来解码包含 14 个字符的 Matrix 25 码制。
数字设置码 见附录，改变选择或者取消一个
不正确的输入设置，扫描附录中的
取消条形码 。
Matrix 25 - One Discrete Length 一个单独长度
Two Discrete Lengths - Select this option to decode only those codes containing two selected lengths.
For example, select Matrix 25 Two Discrete Lengths, then scan 0, 2, 1, 4, to decode only Matrix 25 symbols
containing 2 or 14 characters. Numeric Bar Codes is in appendix. To change the selection or cancel an
incorrect entry, scan Cancel in appendix.
两个单独的长度-选择此长度可用来解码那些包含两个既定长度的代码。例如，选择Matrix 25 Two
Discrete Lengths，然后扫描0，2，1，4，只可用来解码包含2个或者14个字符的Matrix 25码制。
数字设置码
见附录，改变选择或者取消一个不正确的输入设置，扫描附录中的 取消条形码 。
Matrix 25 - Two Discrete Lengths 两个单独的长度
Length Within Range - Select this option to decode codes within a specified range. For example, to
decode Matrix 25 symbols containing between 4 and 12 characters, first scan Matrix 25 Length Within
Range, then scan 0, 4, 1 and 2 (single digit numbers must be preceded by a leading zero). Numeric Bar
Codes is in appendix. To change the selection or cancel an incorrect entry, scan Cancel in appendix.
特定范围内的长度-选择此项解码指定范围的代码。例如，解码包含 4 个到 12 个字符的 Matrix 25，首先扫描
Matrix 25 Length Within Range，然后扫描 0，4，1，和 2（不足 3 位用 0 补齐）。
数字设置码 见附录，改变
选择或者取消一个不正确的输入设置，扫描附录中的
取消条形码 。
Matrix 25 - Length Within Range 特定范围内的长度
Any Length - Scan this option to decode Matrix 25 symbols containing any number of characters.