Sunmi Blink - Set Lengths for Code 11 Code 11 长度设置



36
Set Lengths for Code 11 Code 11 长度设置
The length of a code refers to the number of characters (i.e., human readable characters), including
check digit(s) the code contains. Set lengths for Code 11 to any length, one or two discrete lengths, or lengths
within a specific range.
一个代码的长度指的是此代码所包含的字符数（如：人类可读的字符），包括校验码。I 2 of 5可设置成任
意的长度，一个或两个单独的长度，或者在特定范围内的长度。
One Discrete Length - Select this option to decode only Code 11 symbols containing a selected length.
Select the length using the Numeric Bar Codes in appendix. For example, to decode only Code 11 symbols
with 14 characters, scan Code 11 - One Discrete Length, then scan 1 followed by 4. To correct an error or to
change the selection, scan Cancel in appendix.
一个单独长度-选择此长度只可用来解码包含既定长度的Code 11。附录中的
数字设置码 可设置长度，例如，
扫描Code 11 - One Discrete Length，然后扫描1,4，来解码包含14个字符的Code 11码制。改变选择或者取
消一个不正确的输入设置，扫描附录中的
取消条形码 。
Two Discrete Lengths - Select this option to decode only Code 11 symbols containing either of two
selected lengths. Select lengths using the Numeric Bar Codes in appendix. For example, to decode only those
Code 11 symbols containing either 2 or 14 characters, select Code 11 - Two Discrete Lengths, then scan 0,
2, 1, and then 4. To correct an error or to change the selection, scan Cancel in appendix.
两个单独的长度-选择此长度可用来解码包含两个既定长度的Code 11。附录中的
数字设置码 可设置长度，
例如，选择Code 11 - Two Discrete Lengths，然后扫描0，2，1，4，只可用来解码包含2个或者14个字符的
Code 11码制。改变选择或者取消一个不正确的输入设置，扫描附录中的
取消条形码 。
Length Within Range - Select this option to decode a Code 11 symbol with a specific length range.
Select lengths using the Numeric Bar Codes in appendix. For example, to decode Code 11 symbols
containing between 4 and 12 characters, first scan Code 11 - Length Within Range. Then scan 0, 4, 1, and 2
(single digit numbers must always be preceded by a leading zero). To correct an error or change the
selection, scan Cancel in appendix.
特定范围内的长度-选择此项解码指定范围长度的Code 11。附录中的
数字设置码 可设置长度，例如，解码
包含4个到12个字符的Code 11，首先扫描Code 11 - Length Within Range，然后扫描0，4，1，和2（不足3
位用0补齐）。改变选择或者取消一个不正确的输入设置，扫描附录中的
取消条形码 。
Any Length - Scan this option to decode Code 11 symbols containing any number of characters within
the scan engine capability.
任意长度-在识读引擎的能力范围内，扫描此项可解码包含任意字符的Code 11码制。
Code 11 - One Discrete Length Code 11 –一个单独长度
Code 11 - Two Discrete Lengths Code 11 –两个单独长度
Code 11 - Length Within Range Code 11 –特定范围内的长度