SunStar SPS/A-3020 5030 SERIES - Origin Return Test

67
E. If you want to finish Solenoid Test, press ESC key.
If you want to finish test menu, press ESC key.
F. Back to the initial screen by pressing ESC key.
A. Press MODE key.
B. After moving to “4. Machine Test”by using
direction keys , press ENTER key.
C. After moving to “12. Origin Test”by using
direction keys , press ENTER key.
D. If you press any key, the Origin Test is
automatically finished after moving to the origin.
E. If you want to finish test menu, press ESC key.
F. Back to the initial screen by pressing ESC key.
<< Main Menu >>
4. Machine Test
5. Pattern List
6. EMB Call
<< Test Menu >>
12.Origin Test
13.Jump Test
Origin Test.
Press AnyKey
(13) Origin Test
It is to test if the function of moving to origin works properly.
A.
Press MODE key.
B. After moving to “4. Machine Test” by using
direction keys , press ENTER key.
C. After moving to “13. Jump Test” by using
direction keys , press ENTER key.
<< Main Menu >>
4. Machine Test
5. Pattern List
6. EMB Call
<< Test Menu >>
13.Jump Test
(14) Jump Test
It is to test if the XY step motor works properly and to perform jump test.