Suntex PC-3310 - 7 Calibration

7. Calibration
Block diagram of Calibration
Cal. Info.
TECH NIST
Multi-Cal =1
or press CAL
Temp. adjust for
first buffer (MTC
or ATC)
Reading for first
buffer value
Temp. adjust for
second buffer
(MTC or ATC)
Temp. adjust for
third buffer
(MTC or ATC)
Temp. adjust for
first buffer (MTC
or ATC)
Any
Reading for first
buffer and adjust
Temp. adjust for
second buffer
(MTC or ATC)
Reading for
second buffer and
adjust
Temp. adjust for
third buffer
(MTC or ATC)
Reading for third
buffer and adjust
Reading for
second buffer
value
Reading for third
buffer value
Multi-Cal =2
or press CAL
Multi-Cal =2
or press CAL
Multi-Cal =1
or press CAL
Multi-Cal =1
or press CAL
Temp. adjust for
first buffer (MTC
or ATC)
Reading for first
buffer value
Temp. adjust for
second buffer
(MTC or ATC)
Temp. adjust for
third buffer
(MTC or ATC)
Reading for
second buffer
value
Multi-Cal =2
or press CAL
Return
Setting
Return
Time
Input
Auto
Manual
Exit
Code
Setting
Input
Password
OFF ON
Input
New
Code
Back to previous
level or action
烉
烉
烉
烉
Reading for third
buffer value
PC-3310
мт