Suntex PC-3310 - Brief Instruction

Brief Instruction
Description of set-up settings炷see chapter 6 for details炸
press and simultaneously to see the overview of the set-up settings now. Then press
if you would like to modify set-up settings. Press keypad according to index of keypad on the screen.
Index of keypad烉
烉
keypad Accordingly item Description
Back to upper layer
Choose leftward of change to left page
Increase digit
Choose rightward of change to right page
Decrease digit
Confirm settings after modifications and then go through
next step
Selection of set-up items
烉
keypad Accordingly item Description
Mode Measurement mode, to choose pH or ORP measurement
Multi-Cal.
Multi-point calibration, to choose 1, 2, or 3 points
calibration (PC-3310 provides up to three points
calibration)
Temperature
Temperature measurement and compensation, including
MTC, PTC, NTC (3 types total). MTC---Manual
temperature compensation, PTC/NTC--- auto temperature
compensation
Relay 1 First relay setting, to choose action off or Hi/Lo alarm
Relay 2 Second relay setting, to choose action off or Hi/Lo alarm
к