Clean
Automatic wash time setting, to choose electrode clean
equipment’s ON and OFF duration
Analog 1 Current output according to pH or ORP setting range
Analog 2 Current output according to temperature setting range
Clock
Clock setting (When out of power and reboot it, the
instrument’s time setting will return to the factory
pre-setting)
Digital Filter
Take every serial 1~60 measurements, average them
continuously, and make it as the readings
Back Light
Backlight setting, to set Auto/ON/OFF backlight,
brightness, and sensitivity
Contrast Contrast of screen setting
Return Setting of returning to the measurement mode
Code
Security code of set-up mode. The set-up code is
precedential to calibration code, thus it can pass a different
security code of calibration.
Language
Available for English, Traditional Chinese, Simplified
Chinese
л
To Next Page
Loading...
