Superior spx 960 - Personal Protection Equipment (PPE); Safety Devices

Istruction Manual for Operation and Maintenance SPX-960:
2.4.2 SAFETY DEVICES
• Make sure that the protections, guards and covers are po-
sitioned correctly, especially after repair works have been
made on the machine. Immediately have any damaged
protection serviced (Fig. 6).
• Do not remove the safety devices. Always keep them in
good condition.
• Improper usage of safety devices may cause serious ac-
cidents.
• Make sure that the machine is provided with suitable
devices in compliance with the requirements by the local
standards and regulations.
2.4.3 PERSONAL PROTECTION EQUIPMENT
(PPE)
• Do not wear large clothes and jewels; gather up long hair.
It may get entangled in the controls or moving parts leading
to serious injury.
• During machine operation or maintenance wear approved
safety garments (Fig. 7) such as:
- hard hat;
- tight overalls and refl ective jackets;
- ear muffs;
- protective gloves;
- goggles;
- safety shoes;
- respirators (especially when working in areas with plenty
of dust or polluting gases).
Ask your employer about the existing safety rules and
accident-prevention equipment.
• If the operation to be performed requires hammering pins
or cleaning an element of the fi lter with compressed air,
the operator must wear goggles, a hard hat and protective
gloves.
• Before wearing the personal protection equipment, make
sure that it is in good condition.
• Wear ear defenders whenever work is required in noisy
conditions.
• Always wear the supplied seat belt during operation with
the machine moving (Fig. 8).
Fig. 7
Fig. 6
2
2-12
SAFETY RULES