Istruction Manual for Operation and Maintenance SPX-960:
3.1 MACHINE HANDLING AND TRANSPORTATION
DANGER
Machine handling and transport operations can be very dangerous if great care is not taken in
carrying them out. Keep unauthorized people away. the loading area clear and fenced. Check that
the handling and transportation equipment is suitable and in good condition. Ensure that the
operation area is clear and that there is enough “run-away space”, namely a free and safe area to
move to, should the machine roll over.
3.1.1 MACHINE LOADING AND TRANSPORTATION ON TRAILER
The «Pipe layer SPX 960» can be hauled on long distances on trailers authorized to transport job site
equipment, keeping the platforms low (Fig. 17).
WARNING
The machine must be prepared for transportation by disassembling the components described
below according to the component weight and handling them with suitable lifting equipment.
3
Fig. 17
➤
1
1
2
Front anchoring with two crossed tie
rods to secure trailer/tracks
Rear anchoring with two tie rods to secu-
re trailer/tow pin
➤
3-3
MACHINE TRANSPORTATION
To Next Page
Loading...