Chapter 4: AMI BIOS
4-19
3-Core Ratio Limit
This increases (multiplies) 3 clock speeds in the CPU core in relation
to the bus speed when three CPU cores are active. Press "+" or "-" on
your keyboard to change the value. Enter 0 to use the manufacturer's
default setting.
4-Core Ratio Limit
This increases (multiplies) 4 clock speeds in the CPU core in relation
to the bus speed when four CPU cores are active. Press "+" or "-" on
your keyboard to change the value. Enter 0 to use the manufacturer's
default setting.
CPU Cache Ratio
This item adjusts the CPU Internal Bus Speed Ratio. The maximum
should be the same as the CPU Ratio. Press "+" or "-" on your keyboard
to change the value. Enter 0 to use the manufacturer's default setting.
BCLK Clock Frequency (1/100 MHz)
Use this item to set the CPU clock override value for the host system.
Press "+" or "-" on your keyboard or on-screen keypad to change the
value. The default setting is 10000.
BCLK Ratio
This option selects the BLCK clock ratio ratio for the processor. The op-
tions are 1.00, 1.25, 1.67 and 2.50.
Internal PLL Overvoltage
Enable this option for better stability when overclocking. The options are
Disabled, and Enabled.
CPU BCLK Filter PLL Frequency
This option selects the speed of the CPU BCLK Filter PLL Frequency for
the processor. The options are High Frequency 3.2GHz, and Lower
Frequency 1.6GHz. CPU BCLK Filter Frequency. Choose 1.6 for better
overclocking capabilities
LCPLL or SBPLL Select
This option selects between LCPLL (resonant circuit-based PLL) and SBPLL
(Self-Biased PLL). The options are LCPLL, and SBPLL.
To Next Page
Loading...
Need help?
General
