4-44
Supermicro C7Z97-OCE Motherboard User’s Manual
Alternate ID (RAID Mode Only)
This item Enables or Disables the RAID ID feature for SATA Ports 0~5.
The options are Enabled and Disabled.
The information of the installed SATA drives on the particular SATA
port are displayed.
•Software Preserve Support
If the item SATA Mode Selection above is set to AHCI, the follow-
ing items are displayed:
Port 0 ~ Port 5
This item Enables or Disables SATA Ports 0~5. The options are Enabled
and Disabled.
Hot Plug
This feature designates the port specied for hot plugging. Set this item
to Enabled for hot-plugging support, which will allow the user to replace
a SATA disk drive without shutting down the system. The options are
Enabled and Disabled.
External SATA
This item Enables or Disables External SATA (eSATA) support. The options
are Enabled and Disabled.
SATA Device Type
This feature congures the selected SATA port to support either a solid
state drive or hard disk drive. The options are Hard Disk Drive and
Solid Sate Drive.
Spin Up Device
On an edge detect from 0 to 1, set this item to allow the PCH to start
a COMRESET initialization