4-20
Supermicro C7Z97-OCE Motherboard User’s Manual
CPU Non Turbo Ratio Override
Use this item to set CPU ratio override when not in turbo mode. Press
"+" or "-" on your keyboard or on-screen keypad to change the value.
The default setting is dependent on the type of CPU installed.
CPU Power Setting
Enhanced Intel SpeedStep Technology
Enhanced Intel SpeedStep Technology (EIST) allows the system to
automatically adjust processor voltage and core frequency in an effort
to reduce power consumption and heat dissipation. Please refer to
Intel’s web site for detailed information. The options are Disabled
and Enabled.
Turbo Mode
This feature allows processor cores to run faster than the frequency
recommended by the manufacturer. The options are Disabled and En-
abled. If this feature is set to Enabled, the following items will display:
CPU Turbo Setting
Package TDP Lock Enable
Select Enabled to lock the Thermal Design Power (TDP) value for the
processor. The options are Disabled and Enabled.
Long Duration Power Limit (Watt)
This feature congures Package Power Limit 1, in watts. When the limit
is exceeded, the CPU ratio is lowered after a period of time (see item
below). A lower limit can save power and protect the CPU, while a higher
limit improves performance. Use the number keys on your keyboard to
enter the value. The default setting is dependent on the CPU.
Long Duration Power Limit Time (Seconds)
This item allows the user to determine how long the CPU should operate
at the power limit set by the user for the item above, if the power limit
is exceeded. Use the number keys on your keyboard to enter the value.
The default setting is 8.
To Next Page
Loading...
Need help?
General
