Chapter 4: AMI BIOS
4-29
Graphics OverClocking
Graphics Core Ratio Limit
Use this feature to set graphics core ratio limit. Press "+" or "-" on your
keyboard or on-screen keypad to change the value. The default setting
is dependent on the type of CPU installed.
GT Voltage Mode
Use this feature to select the Overclocking GT mode. The options are
Override, Offset and Adaptive.
GT Adaptive Voltage Target (mV)
(if Adaptive is selected above) Use this feature to set the GT Adaptive
voltage Target(mV) value from 0mV to 2000mV. Enter 0 to use the
manufacture default value.
GT Override Voltage Target (mV)
(if Override is selected above) Use this feature to set the GT Adaptive
voltage Target(mV) value from 0mV to 2000mV. Enter 0 to use the
manufacture default value.
GT Voltage Offset (mV)
(if Offset is selected above) Use this feature to set the GT Adaptive
voltage Target(mV) value from 0mV to 2000mV. Enter 0 to use the
manufacture default value.
To Next Page
Loading...
Need help?
General
