Supero C7Z97-OCE - PCH 1.5 V Voltage; Overclocking SVID and FIVR Options; SVID Control Enable; SVID Override Voltage Target (MV)

Chapter 4: AMI BIOS
4-23
PCH 1.5V Voltage
Use this feature to trim the 1.5V PCH Voltage. Select from these val-
ues: 1.366V, 1.416V, 1.466V, 1.516V, 1.566V, 1.616V, 1.666V, 1.716V,
1.766V and 1.816V.
Overclocking SVID and FIVR Options
SVID Control Enable
Select Enabled to enable SVID control for Intel SVID Protocol support.
If this setting is set to Disabled, there will be no change made to SVID
until the CPU powers down. The options are Enabled and Disabled.
SVID Override Voltage Target (mV)
Use this feature to set the value for SVID Override Voltage Target (up to
2500 mV). Enter 0 to use the manufacture default value.
FIVR Faults Enable
Select Enabled to enable FIVR Faults support. If this setting is set to
Disabled, there will be no change made to FIVR Faults settings until the
CPU powers down. The options are Enabled and Disabled.
FIVR Efciency Enable
Select Enabled to enable FIVR Efciency support. If this setting is set to
Disabled, there will be no change made to FIVR Efciency status until
the CPU powers down. The options are Enabled and Disabled.