15
Appendix F - DVACS Alarm Flow Comparison: SG-DVL2A Configuration / SG-DRL3-IP
Configuration
Appendix G - T-LINK TL300 Contact ID Reports
On V1.20 or higher, the SG-DRL3-IP can receive Contact ID events
from the T-LINK TL300. The Contact ID messages will be generated
by the panel attached to the T-LINK TL300, including the panel
account code, please refer to the panel manufacturer documenta-
tion for all possible events for that panel. The T-LINK will still trans-
mit it's internal events in SIA.
Examples:
From panel through the T-LINK TL300:
12 Jul 2005 09:36:08 - 12 Jul 2005-09:36:06-01/03-SG -01-001-0092-E100-00 MEDICAL 000
12 Jul 2005 09:36:11 - 12 Jul 2005-09:36:09-01/03-SG -01-001-0092-R100-00 MEDICAL 000
From the same T-LINK TL300 Input 3:
12 Jul 2005 09:37:20 - 12 Jul 2005-09:37:18-01/03-SG -01-001-0000001212--Nri1/FA0003
12 Jul 2005 09:37:20 - 12 Jul 2005-09:37:18-01/03-SG -01-001-0000001212--Nri1/FH0003
DVAC Panel
ID = 34
Automation
101A 034 ...
Automation
1 digit
101A 034...
2 digits
10101A 034...
3 digits
10100A 034...
Automation
1 digit
S025[#000034|...
2 digits
S0245[#000034|...
3 digits
S02345[#000034|...
TL250
ID=34
Account =
010A000034
RRLL=010A
DVACS Protocol
DVACS Protocol
Zones
T-LINK DVACS
T-LINK STANDARD
DVL2A
RRL = 01A
SG-DRL3-IP
RRLLL = 02345
IP Account =
010A000034