Need help?Do you have a question about the Sur-Gard System Five and is the answer not in the manual?
Provides a comprehensive overview of the SG-System 5 receiver and its core functions.
Details the key features and capabilities of the SG-System 5, including its size and interface options.
Details specific programming requirements necessary to comply with UL864 standards for fire alarm systems.
Provides a streamlined guide for the initial installation and connection of the SG-System 5.
Step-by-step instructions for physically installing the SG-System 5 receiver unit into a rack.
Details the SG-CPM5 module, its functions, pin-outs, and setup procedures.
Describes the SG-DRL5-IP line card, its configurations, and LED status indicators.
Explains the fundamental connectivity and console software usage for basic system operation.
Guides users through interacting with the SG-CPM5 via the LCD, covering bootup, calibration, and menus.
Covers all configurable options for the SG-CPM5, categorized by function like IP, User, System, LCD, Automation, Printer, and Troubles.
Details the configuration options specific to the SG-DRL5-IP line card, covering hardware, signaling, troubles, and system settings.
General| Type | Alarm Receiver |
|---|---|
| Compatibility | Various alarm panels using SIA, Contact ID and other formats |
| Protocols | Contact ID, SIA, 4/2, 3/1, Other Formats |
| Alarm Current | 1.5A |
| Operating Temperature | 32°F to 122°F (0°C to 50°C) |
| LED Indicators | Power, Status, Alarm |
To Next Page
