Sur-Gard System Five - Profile Options; Dynamic Profile Options

6.0 Options
- 98 -
Account codes longer than 10 digits are truncated to 10 digits to match the FIBRO account code. The function applies to all transmitter types and is only
dependent on the profile being used.
After the account code substitution has been performed, option 404 (account digit max) can be applied as it would on the unmodified signal. The signals
stored to the alarm event buffer are the updated signal with the substituted signal.
Notes:
DVAC protocol will not follow this option.
This is a dynamic option.
Setting:
00 - Account code substitution is disabled
01 - Account code substitution is enabled
6.2.5 Profile Options
6.2.5.1 Dynamic Profile Options
IP channel profiles are sets of customized options designed to improve efficiency by tailoring the programming of the receiver to a customer's unique
parameters.
The following options are used with the DNIS table to provide custom options per DNIS and per profile.
Option [221]: Transmitter Absent Debounce Time
Default (120)
Option [222]: Transmitter Restoral Time
Default (60)
Option [402]: UTC Time Update
Default (00)
Option [403]: Two-way Audio Message
Default (00)
Option [404]: Account Digit Max
Default (00)
Option [407]: Encryption Enable
Default (Disabled)
Option [408]: Encryption Randomization Interval
Default (0000)
Option [411]: Account Code Substitution
Default (00) - Disabled