Sur-Gard System Five - 1 Table of Contents

1.0 Table of Contents
- 2 -
1.0 Table of Contents
1.0 Table of Contents 2
2.0 Introduction 7
2.1 SG-System 5 overview 8
2.1.1 CPM redundancy 8
2.1.2 Diagrams 8
2.1.3 Description 10
2.1.4 Specifications 10
2.2 System features 10
2.2.1 SG-System 5 10
2.2.2 Visual Verification 11
2.3 Approvals 11
2.3.1 Industry approvals 11
2.3.2 UL864 programming requirements 12
2.3.3 Printers 13
Serial printer 13
TCP/IP printer 13
SG-System 5 Console software system requirements 13
2.3.4 UL Manual mode 13
2.3.5 SG-System 5 power limited circuit separation 13
3.0 Receiver Setup and Operation 15
3.1 SG-System 5 quick install guide 16
3.1.1 Receiver installation 18
3.1.2 SG-CPM5 LEDs 20
4.0 Hardware Descriptions and Specifications 21
4.1 SG-MLRF5 22
4.1.1 SG-MP5 midplane 22
4.1.2 SG-S5CFANTR – SG-CPM5 fan tray 22
4.1.3 SG-MLRF5-RM – Mounting rails 23
4.2 SG-CPM5 - Central processing module 23
4.2.1 SG-CPM5 I/O terminal pin-outs 24
4.2.1.1 UPS AC Failure – Pin 1 24
4.2.1.2 UPS DC Failure – Pin 3 24
4.2.1.3 Remote ACK – Pin 4 24
4.2.1.4 Buzzer Follow Output – Pin 7 24
4.2.1.5 Trouble Status Output – Pin 9 24
4.2.1.6 Network Status Output – Pin 11 25
4.2.2 SG-CPM5 Setup 25
4.2.2.1 Connecting the SG-CPM5 Fan Cable 25
4.2.2.2 Y-Cable 25
4.2.2.3 RTC Battery 25
4.2.2.4 EMMC Memory 25
4.2.2.5 DDR3 Memory 26
4.2.3 SG-CPM5BATT - RTC battery 26
4.2.4 SG-S5SERCAB - Y-cable 27
4.2.4.1 Maximum connected cable length 28
4.2.5 SG-CPM5 fan tray replacement 28
4.2.6 UPS setup 29
4.3 SG-DRL5-IP - IP line card 30
4.3.1 SG-DRL5-IP configurations 31
SG-DRL5-IP STD 31
SG-DRL5-IPF 31
SG-DRL5-IPE 31
4.3.2 SG-DRL5-IP LED status indicators 31
4.3.2.1 Network fault 32
4.3.2.2 Invalid report condition 32
4.3.2.3 SG-CPM5 absent 32
4.3.2.4 Ethernet interface 32
4.3.2.5 Supervised receiver database 32
4.3.2.6 Profiles 33
4.3.2.7 Rules for account table exceeded messages 33