4.0 Hardware Descriptions and Specifications
In this chapter...
4.1 SG-MLRF5 22
4.1.1 SG-MP5 midplane 22
4.1.2 SG-S5CFANTR – SG-CPM5 fan tray 22
4.1.3 SG-MLRF5-RM – Mounting rails 23
4.2 SG-CPM5 - Central processing module 23
4.2.1 SG-CPM5 I/O terminal pin-outs 24
4.2.2 SG-CPM5 Setup 25
4.2.3 SG-CPM5BATT - RTC battery 26
4.2.4 SG-S5SERCAB - Y-cable 27
4.2.5 SG-CPM5 fan tray replacement 28
4.2.6 UPS setup 29
4.3 SG-DRL5-IP - IP line card 30
4.3.1 SG-DRL5-IP configurations 31
4.3.2 SG-DRL5-IP LED status indicators 31
4.3.3 SG-DRL-IP setup 33
4.4 SG-DRL5-IP PAD – SG-DRL5-IP paddle card 36
4.5 SG-S5LFANTR - Line card fan tray 36
4.6 SG-DRL5/DRL5E/DRL5-2L - Line card 37
4.7 SG-DRL5-PAD - Paddle card 37
4.8 SG-DRL5-ADPT - Adapter card 38
4.9 SG-DRL4-2L upgrade to System 5 39
4.10 Installing SG-DRL5 PSTN cards in a SG-System 5 40
4.11 SG-PSU5 250W and 600W power supply 41
4.11.1 SG-PSU5-600/SG-PSU5-250 installation 42
4.11.2 Power management 42
4.12 SG-UIB5 - User interface 42
4.12.1 SG-UIB5 LCD replacement 43
4.13 SG-SYS5MEM4 - Expandable EMMC 44
4.14 DDR3 RAM 45
4.15 SD card 45
To Next Page
Loading...
