Need help?Do you have a question about the Sur-Gard System I and is the answer not in the manual?
Lists key features and capabilities of the SG-System I receiver.
Identifies compatible central station automation software for the SG-System I.
Details industry approvals and standards met by the SG-System I.
Provides technical specifications including electrical, environmental, and dimensions.
Lists the components included in the SG-System I package.
Describes the front and rear panel controls and indicators of the SG-System I.
Guides through the installation setup and initial testing procedures.
Explains operational states (Active, Manual) and programming access.
Details the unit's interface, navigation menus, and system functions.
Explains the meaning of various LED indicators on the unit.
Lists all system options with their corresponding page numbers.
Details the procedure for programming system options.
Details various system configuration options and their functions.
Provides an index of channel options and their page numbers.
Details the procedure for programming channel options.
Lists and describes static configuration options for channels 1 and 2.
Lists and describes dynamic configuration options for channels 1 and 2.
Lists all IP options with their corresponding page numbers.
Details the procedure for programming IP options.
Details various IP configuration options and their functions.
Provides a list of system events and their corresponding automation and printer messages.
Details the function and pinouts of various ports on the SG-System I unit.
Describes the parallel printer port and its pinout.
Details serial printer and RS-232 automation ports and their pinouts.
Describes the I/O ports, including inputs and outputs.
Lists compatible IP communicators and the formats they support.
Provides a comprehensive list of printer words used for event reporting.
Explains how profiles are used to customize communication with control panels.
To Next Page
General
