Sur-Gard System I - Option 171: Library Select

CHAPTER FIVE - OPTIONS: CHANNELS 1 and 2
56
SG-System I Operating Manual
5
20, 30-39 & 41-5A - Use common event codes (space, 0-9, A-Z). When using common event codes, DSC recommends that either hexadeci-
mal code '5A' (ASCII 'Z') or hexadecimal code '41' (ASCII 'A') be used. The 'Space' character (Hex 20) can be used as the common event
code with certain automation software packages to avoid account code database changes when switching over from other brand receivers to
the Sur-Gard receiver.
B0-DF ('0'-'9', 'A'-'Z' with the most significant bit set). This range will function in the same way as 30-39, 41-5A, with the exception that, for
the Superfast Ademco Format, the Printer Message text will not be output.
For example:
"01-002-1234-A4-".
Option 171: Library Select
Default (04)
Use this option to determine how to make the best use of the Printer Words options.
NOTE: Option 171 is disregarded when using SIA, ITI, Contact-ID, ACRON, MODEM II, MODEM IIE, MODEM
IIIa², FBI SuperFast, BFSK, ADEMCO Super Fast, and SK FSK1, 2 formats.
Table 19:Library Select
Value Description
00
No printer words.
01
Printer words options used for 1-digit reporting code formats only; other‘s will use pre-defined library.
02
Printer words options used for 2-digit reporting code formats only; others will use pre-defined library.
03
Printer words options used for 3-digit reporting code formats only; others will use pre-defined library.
04
Printer words options used for 1-digit and 2-digit reporting code formats only; others will use pre-defined library.
05
Printer words options used for 1-digit, 2-digit, and 3-digit reporting code formats.