Sur-Gard System Five - SG-CPM5 Options: [6 XX] and [7 XX] - Troubles

6.0 Options
- 83 -
Option [510]: Date Format
Default (International)
Selects the format used to represent date for printer output. Format [1] represents US format: MM/DD/YY. Format [0] represents International format:
DD/MM/YY.
Option [511]: Printer Test
Default (Enabled)
When this option is enabled, a test signal is sent to all active printer(s) at 05:00 and 17:00 hrs. This option is set to Enabled by default.
Printer message:
26 Nov 2012 16:41:25 - 26 Nov 2012-16:41:25-00/00-SG -01-000-0000--Printer Test Message
6.1.7 SG-CPM5 Options: [6XX] and [7XX] - Troubles
The following sections control the display of trouble conditions. For installations that do not have a full SG-System 5 configuration, selected troubles
can be disabled. Disabled troubles do not display.
Option [601]: CPM5 1 Fan Trouble
Default (Enabled)
This option is used to enable or disable SG-CPM5 1 fan supervision. If this option is set to ‘Disabled’, the trouble condition is not reported.
NOTE: Must be enabled for UL installations.
Option [602]: CPM5 2 Fan Trouble
Default (Enabled)
This option is used to enable or disable SG-CPM5 2 fan supervision. If this option is set to ‘Disabled’, the trouble condition is not reported.
NOTE: Must be enabled for UL installations.
Option [603]: PSU5 1 Trouble
Default (Enabled)
This option is used to enable or disable SG- PSU5 1 supervision. If this option is set to ‘Disabled’, the trouble condition is not reported.
NOTE: Must be enabled for UL installations.
Option [604]: PSU5 2 Trouble
Default (Enabled)
This option is used to enable or disable SG- PSU5 2 supervision. If this option is set to ‘Disabled’, the trouble condition is not reported.
NOTE: Must be enabled for UL installations.
Option [605]: Fan Tray 1 Trouble
Default (Enabled)
This option is used to enable or disable fan tray 1 supervision. If this option is set to ‘Disabled’, the trouble condition is not reported.
Option [606]: Fan Tray 2 Trouble
Default (Enabled)
This option is used to enable or disable fan tray 2 supervision. If this option is set to ‘Disabled’, the trouble condition is not reported.
Option [607]: Fan Tray 3 Trouble
Default (Enabled)
This option is used to enable or disable fan tray 3 supervision. If this option is set to ‘Disabled’, the trouble condition is not reported.
Option [608]: Fan Tray 4 Trouble
Default (Enabled)
This option is used to enable or disable fan tray 4 supervision. If this option is set to ‘Disabled’, the trouble condition is not reported.