5.0 Operation
In this chapter...
5.1 Basic operation 47
5.1.1 Connectivity 47
5.1.2 SG-System 5 Console software 47
5.2 Printer 48
5.2.1 Introduction 48
5.2.2 TCP/IP 48
5.2.3 Serial 49
5.3 AHS table management 49
5.4 Automation 50
5.4.1 Automation input/output 50
5.4.2 Automation compatibility 50
5.4.3 Automation protocols 50
5.4.4 Acknowledgment of the signal 50
5.4.5 COM responses 50
5.4.6 Automation absent 50
5.4.7 SIA internal status output 51
5.4.8 Line card addressing 51
5.5 Operation - LCD user interface 51
5.5.1 Bootup 51
5.5.2 Calibration 52
5.5.3 Home screen 53
5.5.4 Logging In 58
5.5.5 Hardware Diagnostics 60
5.5.6 Admin Menu screen 61
5.5.7 Admin access versus user access 61
5.5.8 User menu 69
To Next Page
Loading...
