Sutter Instrument MPC-200 - Page 12

10
MPC-385 SERIES OPERATION MANUAL – REV. 3.21K (20201120)
Table 5-21. Straight-line move ‘S’ command speeds. ........................................................................... 45
Table 6-1. MPC-385 Controller cables and receptacles/connectors. ................................................... 57
Table E-1. ROE-200 configuration switches (rear). .............................................................................. 59
Table E-2. MPC-200 rear-panel config. Switches 1 – 4 (angle setting) for Device, A or B. .............. 59
Table E-3. MPC-200 rear-panel config. Switches 5 – 8 for Device A or B. ......................................... 60
Table E-4. MPC-200 rear-panel RIGHT TRAN config. switches for Device A or B. ........................ 60
Table E-5. USB-VCP interface serial port settings. .............................................................................. 60
Table E-6. Microns/microsteps conversion factors (multipliers). ........................................................ 61
Table E-7. Ranges and bounds. ............................................................................................................... 61
Table E-8. Travel speeds. ......................................................................................................................... 62
Table E-9. MPC-200 external-control commands. ................................................................................ 62
Table E-10. Straight-line move ‘S’ command speeds............................................................................ 66