[View]:
●
change views in TIME mode and during exercise
●
keep pressed to access altitude reference options
[Back Lap]:
●
return to the previous step
●
add a lap during exercise
●
keep pressed to switch to the next sport mode during a multisport exercise
TIP: When changing the values, you can increase the speed by keeping [Start
Stop] or [Light Lock] pressed until the values start to scroll faster.
4.1 Using backlight and button lock
You can set the backlight to Normal, Off, Toggle or Night mode. For
information on the backlight settings, see Chapter 14 Adjusting
settings on page 102.
To activate the backlight:
●
In Normal mode, press [Light Lock] to activate the backlight. The backlight
stays on for a few seconds.
●
In Toggle mode, press [Light Lock] to activate the backlight. The backlight
stays on until you press [Light Lock] again.
●
In Night mode, press any button to activate the backlight.
You can set the button lock to All buttons or Actions only separately for TIME
mode and sport modes. For more information on the button lock settings, see
Chapter 14 Adjusting settings on page 102.
Keep [Light Lock] pressed to lock or unlock the buttons. When the buttons are
locked, is shown on the display.
12
To Next Page
Loading...
