TIP: Machine-wash the heart rate belt regularly after use to avoid unpleasant
odor and to ensure good data quality and functionality. Only wash the textile strap.
Suunto Ambit2 supports ANT+
TM
compatible heart rate straps and certain bike
sensors with the software update 2.0 (available at
http://www.movescount.com/connect/Moveslink). Visit
www.thisisant.com/directory for a list of compatible ANT+ products.
12.5 Starting exercise
To start exercising:
1. Moisten the contact areas and put on the heart rate belt (optional).
2. Press [Start Stop] to enter the start menu.
3. Press [Next] to enter EXERCISE.
4. Scroll the sport mode options with [Start Stop] or [Light Lock] and select a
suitable mode with [Next]. (For more information about the sport mode
options, see Section 12.1 Sport modes on page 69.)
5. The device automatically starts searching for a heart rate belt signal, if the
selected sport mode uses a heart rate belt. Wait for the device to notify that
the heart rate and/or GPS signal have been found, or press [Start Stop] to
select Later. The device continues to search the heart rate/GPS signal.
Once the heart rate/GPS signal has been found, the device starts showing
and recording heart rate/GPS data.
6. Press [Start Stop] to start recording your exercise. To access the options
menu, keep [Next] pressed (see Section 12.2 Additional options in sport
modes on page 70).
74
To Next Page
Loading...
