Suunto AMBIT2 - Route Navigation

NOTE: When you delete a POI in Movescount and synchronize your Suunto
Ambit2, the POI is deleted from the device but only disabled in Movescount.
8.4 Route navigation
8.4.1 Adding a route
You can create a route in Movescount, or import a route created with another
device from your computer to Movescount. You can also record a route with
your Suunto Ambit2 and upload it to Movescount, see Section 12.6.1 Recording
tracks on page 76.
To add a route:
1. Go to www.movescount.com. Follow the instructions on how to import or
create a route.
2. Activate Moveslink and connect your Suunto Ambit2 to your computer
with the Suunto USB cable. The route is transferred automatically to the
device.
NOTE: Make sure that the route you want to transfer to your Suunto Ambit2
has been selected in Movescount.
41
en